Standards Library

Industrial networks – Profiles – Part 1-1: Fieldbus profiles – Communication Profile Family 1
standard by International Electrotechnical Commission, 03/01/2023

Acceptance Criteria for Cathodic Protection of Steel in Concrete Structures
Report / Survey by National Association of Corrosion Engineers, 04/24/2023

Transmitting and receiving equipment for radiocommunication – Radio‑over‑fibre technologies and their performance standard – Part 4: Radio‑over‑fibre-based indoor distributed antenna system (DAS) for 5G
standard by International Electrotechnical Commission, 05/01/2023

Industrial communication networks – Fieldbus specifications – Part 5-26: Application layer service definition – Type 26 elements
standard by International Electrotechnical Commission, 03/01/2023

Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution
standard by National Association of Corrosion Engineers, 01/01/2002

Standard Recommended Practice – Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments
standard by National Association of Corrosion Engineers, 09/13/2000

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing-Assessment of conformity
standard by BSI Group, 07/20/2023

Standard Recommended Practice – Handling and Proper Usage of Inhibited Oilfield Acids
standard by National Association of Corrosion Engineers,

Information technology – Radio frequency identification for item management, Part 6: Parameters for air interface communications at 860 MHz to 960 MHz
standard by Standards Australia, 01/23/2007

Standard Test Method for Measuring the Carburization of Alloys Used for Ethylene Cracking Furnace Tubes
standard by National Association of Corrosion Engineers, 06/26/1998

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals
standard by SAE International, 06/12/2023

Garment System Considerations for Cleanrooms & Other Controlled Environments
Recommended Practice by Institute of Environmental Sciences and Technology, 03/20/2023