Category: AASHTO
AASHTO
AASHTO HBSLD-1
Guide Specification for Service Life Design of Highway Bridges
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO CSDIM-1
Culvert & Storm Drain System Inspection Guide
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO PP 103-20
Standard Practice for Sample Preparation and Polishing of Unbound Aggregates for Dynamic Friction Testing
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO TP 116-20
Standard Method of Test for Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD)
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 209-20
Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot-Mix Asphalt (HMA)
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 315-20
Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO TP 124-20
Provisional Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 88-20
Standard Method of Test for Particle Size Analysis of Soils
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 90-20
Standard Method of Test for Determining the Plastic Limit and Plasticity Index of Soils
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO MP 46-20
Standard Practice for Balanced Mix Design
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 180-20
Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 390-20
Standard Method of Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
standard by American Association of State and Highway Transportation Officials, 2020