Category: AASHTO
AASHTO
AASHTO PP 45-06
Standard Recommended Procedure for Qualification of Deformed and Plain Steel Bar Producing Mills
standard by American Association of State and Highway Transportation Officials,
AASHTO T 164-06
Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
standard by American Association of State and Highway Transportation Officials,
AASHTO M 252-18
Standard Specification for Corrugated Polyethylene Drainage Pipe
standard by American Association of State and Highway Transportation Officials, 2018
AASHTO TP 118-17 (2018)
Standard Method of Test for Characterization of the Air-Void System of Freshly Mixed Concrete by the Sequential Pressure Method
standard by American Association of State and Highway Transportation Officials, 2017
AASHTO OSOW-1
Oversize/Overweight Truck Guide, First Edition
standard by American Association of State and Highway Transportation Officials, 2009
AASHTO R 32-20
Standard Recommended Practice for Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer
standard by American Association of State and Highway Transportation Officials, 2020
AASHTO T 180-01 (2004)
Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
standard by American Association of State and Highway Transportation Officials,
AASHTO T 121M/T 121-05
Standard Method of Test for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete (ASTM Designation: C 138/C 138M-08)
standard by American Association of State and Highway Transportation Officials,
AASHTO M 170M-07
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
standard by American Association of State and Highway Transportation Officials, 08/01/2007
AASHTO T 166-16
Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
standard by American Association of State and Highway Transportation Officials, 2016
AASHTO T 197M/T 197-05
Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance
standard by American Association of State and Highway Transportation Officials,
AASHTO PP 37-04
Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements
standard by American Association of State and Highway Transportation Officials,