Category: IEC
IEC
IEC 60051-2 Ed. 5.0 b:2018
Direct acting indicating analogue electrical measuring instruments and their accessories – Part 2: Special requirements for ammeters and voltmeters
standard by International Electrotechnical Commission, 08/30/2018
IEC 60235-2A Ed. 1.0 b:1974
Measurement of the electrical properties of microwave tubes – Part 2: General measurements – Chapter V: Methods of measuring parasitic noise
standard by International Electrotechnical Commission, 01/01/1974
IEC 60169-11 Ed. 1.0 b:1977
Radio-frequency connectors – Part 11: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling – Characteristic impedance 50 ohms (Type 4.1/9.5)
standard by International Electrotechnical Commission, 01/01/1977
IEC 60068-2-10 Ed. 6.1 b:2018
Environmental testing – Part 2-10: Tests – Test J and guidance: Mould growth CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 04/25/2018
IEC 60519-1 Ed. 6.0 b:2020
Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements
standard by International Electrotechnical Commission, 03/11/2020
IEC 60122-2 Ed. 2.0 b:1983
Quartz crystal units for frequency control and selection – Part 2: Guide to the use of quartz crystal units for frequency control and selection
standard by International Electrotechnical Commission, 01/01/1983
IEC 60068-2-55 Ed. 2.0 b:2013
Environmental testing – Part 2-55: Tests – Test Ee and guidance – Loose cargo testing including bounce
standard by International Electrotechnical Commission, 02/06/2013
IEC 60214-1 Ed. 2.0 en:2014
Tap-changers – Part 1: Performance requirements and test methods
standard by International Electrotechnical Commission, 05/22/2014
IEC 60130-4 Ed. 1.0 b:1966
Connectors for frequencies below 3 MHz – Part 4: Circular multipole connectors with threaded coupling
standard by International Electrotechnical Commission, 01/01/1966
IEC 60092-376 Ed. 3.0 en:2017
Electrical installations in ships – Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
standard by International Electrotechnical Commission, 05/22/2017
IEC 60204-1 Ed. 5.1 b:2009
Safety of machinery – Electrical equipment of machines – Part 1: General requirements CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/11/2009
IEC 60130-17 Ed. 1.0 b:1998
Connectors for frequencies below 3 MHz – Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
standard by International Electrotechnical Commission, 02/12/1998