Category: IEC
IEC
IEC 60189-1 Ed. 3.0 en:2007
Low-frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods
standard by International Electrotechnical Commission, 05/23/2007
IEC 60317-0-7 Ed. 1.0 b:2012
Specifications for particular types of winding wires – Part 0-7: General requirements – Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm
standard by International Electrotechnical Commission, 04/19/2012
IEC 60268-3 Ed. 5.0 b:2018
Sound system equipment – Part 3: Amplifiers
standard by International Electrotechnical Commission, 04/25/2018
IEC 60068-3-4 Ed. 1.0 b:2001
Environmental testing – Part 3-4: Supporting documentation and guidance – Damp heat tests
standard by International Electrotechnical Commission, 08/28/2001
IEC 60311 Ed. 4.1 en:2006
Electric irons for household or similar use – Methods for measuring performance CONSOLIDATED EDITION
standard by International Electrotechnical Commission, 02/21/2006
IEC 60068-2-52 Ed. 3.0 b:2017
Environmental testing – Part 2-52: Tests – Test Kb: Salt mist, cyclic (sodium chloride solution)
standard by International Electrotechnical Commission, 11/07/2017
IEC 60282-1 Ed. 6.0 b:2005
High-voltage fuses – Part 1: Current-limiting fuses
standard by International Electrotechnical Commission, 11/21/2005
IEC 60068-2-20 Ed. 4.0 b:1979
Environmental testing. Part 2: Tests. Test T: Soldering
standard by International Electrotechnical Commission, 01/01/1979
IEC 60282-1 Ed. 5.0 b:2002
High-voltage fuses – Part 1: Current-limiting fuses
standard by International Electrotechnical Commission, 01/29/2002
IEC 60034-19 Ed. 2.0 b:2014
Rotating electrical machines – Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
standard by International Electrotechnical Commission, 09/25/2014
IEC 60204-11 Ed. 2.0 b:2018
Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
standard by International Electrotechnical Commission, 07/31/2018
IEC 60169-9 Ed. 1.0 b:1978
Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling – Characteristic impedance 50 ohms (Type SMC)
standard by International Electrotechnical Commission, 01/01/1978