Category: IEC
IEC
IEC 62056-31 Ed. 1.0 b:1999
Electricity metering – Data exchange for meter reading, tariff and load control – Part 31: Use of local area networks on twisted pair with carrier signalling
standard by International Electrotechnical Commission, 11/30/1999
IEC 62479 Ed. 1.0 b:2010
Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
standard by International Electrotechnical Commission, 06/16/2010
IEC 62418 Ed. 1.0 b:2010
Semiconductor devices – Metallization stress void test
standard by International Electrotechnical Commission, 04/22/2010
IEC 62153-4-15 Ed. 1.0 en:2015
Metallic communication cable test methods – Part 4-15: Electromagnetic compatibility (EMC) – Test method for measuring transfer impedance and screening attenuation – or coupling attenuation with triaxial cell
standard by International Electrotechnical Commission, 12/04/2015
IEC 62067 Ed. 2.0 b:2011
Power cables with extruded insulation and their accessories for rated voltages above 150 kV (<i>U</i><sub>m</sub> = 170 kV) up to 500 kV (<i>U</i><sub>m</sub> = 550 kV) – Test methods and requirements
standard by International Electrotechnical Commission, 11/24/2011
IEC 62153-4-9 Ed. 1.0 en:2008
Metallic communication cable test methods – Part 4-9: Electromagnetic compatibility (EMC) – Coupling attenuation of screened balanced cables, triaxial method
standard by International Electrotechnical Commission, 03/18/2008
IEC 62305-3 Ed. 1.0 b:2006
Protection against lightning – Part 3: Physical damage to structures and life hazard
standard by International Electrotechnical Commission, 01/17/2006
IEC 62290-1 Ed. 1.0 b:2006
Railway applications – Urban guided transport management and command/control systems – Part 1: System principles and fundamental concepts
standard by International Electrotechnical Commission, 07/24/2006
IEC 62481-3 Ed. 1.0 en:2010
Digital living network alliance (DLNA) home networked device interoperability guidelines – Part 3: Link protection
standard by International Electrotechnical Commission, 11/10/2010
IEC 62428 Ed. 1.0 b:2008
Electric power engineering – Modal components in three-phase a.c. systems – Quantities and transformations
standard by International Electrotechnical Commission, 07/23/2008
IEC 62217 Ed. 2.0 b:2012
Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria
standard by International Electrotechnical Commission, 09/27/2012
IEC 62271-110 Ed. 4.0 b:2017
High-voltage switchgear and controlgear – Part 110: Inductive load switching
standard by International Electrotechnical Commission, 10/05/2017