Category: SAE

CLAMP, LOOP TYPE BONDING
standard by SAE International, 12/10/2020

Identification Marking Methods
standard by SAE International, 01/21/2021

Ground-Plane Microphone Configuration for Propeller-Driven Light-Aircraft Noise Measurement (Stabilized: Dec 2020)
standard by SAE International, 12/21/2020

Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni – 19Cr – 3.0Mo – 5.0Cb – 0.90Ti – 0.50Al – 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 12/29/2020

Aircraft Electrical Voltage Level Definitions
standard by SAE International, 01/27/2021

BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .4375-20 UNJF-3A
standard by SAE International, 12/30/2020

BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, LOW ALLOY STEEL UNS G87400, CADMIUM PLATED, .2500-28 UNJF-3A
standard by SAE International, 03/03/2021

Hydraulic Cylinder Rod Corrosion Test
standard by SAE International, 12/22/2020

FITTING, ADAPTER, PORT, REDUCER
standard by SAE International, 02/11/2021

Steel, Corrosion Resistant, Sheet, Strip, and Plate 9.0Mn – 20Cr – 6.5Ni – 0.28N Solution Heat Treated
standard by SAE International, 03/01/2021

Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr – 13Ni – 2.5Mo (SAE 30316) Solution Heat Treated
standard by SAE International, 12/10/2020

Steel, Bars, Forgings, and Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C) (SAE 8620) Consumable Electrode Vacuum Remelted
standard by SAE International, 04/06/2021