Category: SAE

Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni – 19Cr – 3.0Mo – 5.1Cb (Nb) – 0.90Ti – 0.50Al – 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
standard by SAE International, 05/22/2023

Transmitted Enhanced Loran (eLoran) Signal Standard for Tri-State Pulse Position Modulation
standard by SAE International, 09/17/2018

Classification System for Rubber Materials
standard by SAE International, 03/23/2023

Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.88Cr – 1.8Ni – 0.42Mo – 0.08V (0.28 – 0.33C) (4330 Mod) Consumable Electrode Remelted
standard by SAE International, 07/24/2023

Design Guidelines for Air-Conditioning Systems for Off-Road Operator Enclosures
standard by SAE International, 07/10/2023

Wrenches, Hand, Twelve Point, High Strength, Thin Wall
standard by SAE International, 03/20/2023

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
standard by SAE International, 03/20/2023

Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
standard by SAE International, 04/12/2023

Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Stabilized: May 2023)
standard by SAE International, 05/22/2023

Gland Design: Nominal 3/8 Inch Cross Section for Compression-Type Seals
standard by SAE International, 06/12/2023

Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
standard by SAE International, 05/01/2023

USCAR-17 Supplement (Stabilized: Jul 2023)
standard by SAE International, 07/10/2023