Category: SAE

External Automatic Brake Adjuster Test Procedure – Truck and Bus
standard by SAE International, 03/01/2021

BOLT, TEE HEAD – CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .5000-20 UNJF-3A
standard by SAE International, 03/03/2021

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS)
standard by SAE International, 02/11/2021

Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr – 6.5Ni – 0.75Mo – 0.30Cb – 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable
standard by SAE International, 01/13/2021

Plating, Nickel General Purpose
standard by SAE International, 12/30/2020

Steel, Bars, Forgings, and Tubing 1.4Mn – 1.5Si – 0.30Cr – 1.8Ni – 0.40Mo (0.23 – 0.28C) Consumable Electrode Vacuum Melted
standard by SAE International, 03/01/2021

JAUS HMI Service Set (Stabilized: Dec 2020)
standard by SAE International, 12/09/2020

Bolts and Screws, Nickel Alloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat Resistant Procurement Specification
standard by SAE International, 03/01/2021

TUBE END – BEADED, DESIGN STANDARD
standard by SAE International, 12/10/2020

Steel, Mechanical Tubing 0.80Cr – 1.8Ni – 0.25Mo (0.35 – 0.40C) (4337)
standard by SAE International, 12/18/2020

Landing Gear System Development Plan
standard by SAE International, 02/11/2021

Bearings, Elastomeric General Specification for
standard by SAE International, 02/11/2021