Category: SAE

Dimensional Compatibility for Commercial Vehicles Fitment of Complete Wheels in Drum Brake Applications – Truck and Bus
standard by SAE International, 11/04/2020

Occupant Restraint Dynamic System Evaluation – Frontal Impact Heavy Trucks (Stabilized: Nov 2020)
standard by SAE International, 11/09/2020

WIRE, THERMOCOUPLE, SMOOTH SURFACE, FP/POLYIMIDE/FP INSULATED, NICKEL/CHROMIUM (KP); NICKEL/ALUMINUM/MANGANESE (KN) THERMOCOUPLE EXTENSION, LIGHT WEIGHT, 260 ¿¿C
standard by SAE International, 10/30/2020

Titanium Alloy, Sheet, Strip, and Plate 5Al – 2.5Sn, Extra Low Interstitial Annealed
standard by SAE International, 08/24/2020

Methods for Determining the Seat Reference Point (SRP) and the Buttock Reference Point (BRP) for Seats in Transport Aircraft, Civil Rotorcraft, and General Aviation Aircraft
standard by SAE International, 11/02/2020

Aluminum Bronze Bars, Rods, and Forgings 90.5Cu – 7.5Al – 1.9Si Stress Relieved
standard by SAE International, 08/20/2020

Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting for Intermittent Use to 360 ¿¿F (182 ¿¿C)
standard by SAE International, 09/09/2020

Motor Vehicle Fiducial Marks and Three-Dimensional Reference System
standard by SAE International, 11/18/2020

Steel Sheet, Strip, and Plate 0.50Cr – 0.55Ni – 0.25Mo (0.38 – 0.43C) (SAE 8740)
standard by SAE International, 09/01/2020

Methods of Shield Termination for Two-Piece, Crimp-Style Ferrule on Shielded Cables
standard by SAE International, 11/03/2020

Steel Sheet, Strip, and Plate 0.50Cr – 0.55Ni – 0.25Mo (0.33 – 0.38C) (8735)
standard by SAE International, 08/24/2020

Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant)
standard by SAE International, 10/28/2020