Category: SAE

Polishing Compound, Aircraft Metal
standard by SAE International, 05/06/2021

Aircraft Tail Bumpers (Stabilized: Jun 2021)
standard by SAE International, 06/22/2021

Aluminum Alloy, Plate 4.0Zn – 2.0Mg – 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved, and Artificially Aged
standard by SAE International, 05/18/2021

Iron-Nickel Alloy, Strip 49Fe – 5.3Cr – 42Ni – 2.5Ti – 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
standard by SAE International, 06/01/2021

Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature -75 ¿¿F (-59 ¿¿C), 75 to 85 Type M Hardness For Seals in Hydraulic Systems
standard by SAE International, 07/23/2021

Aluminum Alloy Extrusions 8.9Zn – 2.2Cu – 2.2Mg – 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
standard by SAE International, 09/15/2021

Steel, Corrosion and Heat Resistant, Seamless Tubing 9.0Mn – 20Cr – 6.5Ni – 0.28N Solution Heat Treated
standard by SAE International, 10/12/2021

Development, Verification, and Validation of a Thermal Model for Determining Current Derating Design Limits of Aerospace Wires and Wire Bundles
standard by SAE International, 08/18/2021

Aluminum Bronze Bars, Rods, and Forgings 87Cu – 9Al – 3Fe Stress Relieved
standard by SAE International, 07/07/2021

FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS
standard by SAE International, 07/28/2021

Chip Detector, Electrical Connection, Remote Indicating (Stabilized: May 2021)
standard by SAE International, 05/28/2021

Steel, Corrosion-Resistant, Investment Castings 16Cr – 1.9Ni – 0.08N As Cast
standard by SAE International, 06/29/2021