Category: SAE
SAE
SAE AMS4766J
Silver Alloy, Brazing Filler Metal 85Ag – 15Mn 1760 to 1780 ¿¿F (960 to 971 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 09/01/2021
SAE AIR64C
Electrical and Electronic Equipment Cooling in Commercial Transports
standard by SAE International, 08/10/2021
SAE AS18280H
Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi
standard by SAE International, 05/26/2021
SAE AS21981A
FERRULE, INNER, UNINSULATED, SHIELD TERMINATING, TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
standard by SAE International, 09/21/2021
SAE AMS7020
Aluminum Alloy Powder 7.0Si – 0.55Mg – 0.12Ti
standard by SAE International, 11/09/2021
SAE AMS4146H
Aluminum Alloy Forgings and Rolled or Forged Rings and Forging Stock 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061 – T4) Solution Heat Treated and Naturally Aged
standard by SAE International, 07/07/2021
SAE AIR6280
Overview of Aircraft Landing Gear Shimmy Analysis Methods
standard by SAE International, 06/10/2021
SAE AMS4910S
Titanium Alloy, Sheet, Strip, and Plate 5Al – 2.5Sn Annealed
standard by SAE International, 06/10/2021
SAE AMS6304N
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, Mechanical Tubing, and Forging Stock 0.95Cr – 0.55Mo – 0.30V (0.40 – 0.50C)
standard by SAE International, 10/22/2021
SAE AMS2403R
Plating, Nickel General Purpose
standard by SAE International, 07/07/2021
SAE AMS2243L
Tolerances Corrosion and Heat-Resistant Steel Tubing
standard by SAE International, 06/29/2021
SAE AMS4783H
Cobalt Alloy, High Temperature Brazing Filler Metal 50Co – 8.0Si – 19Cr – 17Ni – 4.0W – 0.80B 2050 to 2100 ¿¿F (1121 to 1149 ¿¿C) Solidus-Liquidus Range
standard by SAE International, 07/07/2021