Category: SAE

Aluminum Alloy Powder 7.0Si – 0.55Mg – 0.12Ti
standard by SAE International, 11/09/2021

EYE BOLT, A-286 CRES, 1000 ¿¿F
standard by SAE International, 08/26/2021

Ultrasonic Inspection Titanium and Titanium Alloy Bar, Billet and Plate
standard by SAE International, 06/22/2021

Aluminum Alloy, Clad Two Sides Sheet 0.6Mg – 0.35Si – 0.28Cu (No. 24 Brazing Sheet) As Fabricated
standard by SAE International, 07/07/2021

Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
standard by SAE International, 06/29/2021

Aluminum Alloy Alclad 2024, Plate and Sheet (Stabilized: May 2021)
standard by SAE International, 05/28/2021

Equivalence of Equipment Environmental Qualification Standards for Civil and Military Aircraft Equipment
standard by SAE International, 06/22/2021

Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 63Ni – 5.0Cr – 24.5Mo – 5.5Fe (Stabilized: Nov 2021)
standard by SAE International, 11/09/2021

Studs, Steel, UNS S66286 Tensile Strength 130 ksi 1800 ¿¿F Solution Heat Treated, Aged Before Roll Threading Procurement Specification
standard by SAE International, 10/28/2021

GASKET, METALLIC, ENCASED, ANNULAR, COPPER
standard by SAE International, 10/15/2021

Required O-ring Sizes for Quality Conformance Testing
standard by SAE International, 06/10/2021

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil 62Ni – 21.5Cr – 9.0Mo – 3.7Cb (Nb) Cold Rolled and Annealed
standard by SAE International, 08/19/2021