Category: SAE

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Forging Stock 19Cr – 9.5Ni Solution Heat Treated
standard by SAE International, 08/12/2021

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
standard by SAE International, 08/03/2021

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12Cr Ferrite Controlled, Annealed, Consumable Electrode Melted
standard by SAE International, 07/19/2021

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, SPLIT, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS) (Stabilized: Oct 2021)
standard by SAE International, 10/06/2021

Recommended Design and Test Requirements for Hydraulic Thermal Expansion Relief Valves
standard by SAE International, 08/26/2021

Aluminum Alloy, Sheet 3.2Cu – 0.52Mg – 0.30Ag – 0.95 Li – 0.12Zr (2198-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
standard by SAE International, 08/12/2021

BOLT, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A
standard by SAE International, 07/23/2021

Low-Permeation Fuel Fill and Vent Tube
standard by SAE International, 09/14/2021

Preparation for Delivery, General Requirements for Hose Assemblies (Stabilized: Oct 2021)
standard by SAE International, 10/21/2021

Steel, Corrosion Resistant, Bars, Wire, and Forgings, 13Cr (0.30-0.40C) (51420), Annealed
standard by SAE International, 05/18/2021

WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, LIGHTWEIGHT, 80 MICROINCH SILVER-COATED COPPER, 200 ¿¿C, 600 VOLT, ROHS (Stabilized: Sep 2021)
standard by SAE International, 09/15/2021

Steel, Bars, Forgings, and Mechanical Tubing 0.50Cr – 0.55Ni – 0.20Mo (0.18 – 0.23C) (SAE 8620)
standard by SAE International, 07/23/2021