Category: SAE

CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
standard by SAE International, 05/28/2021

Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
standard by SAE International, 05/19/2021

STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A (Stabilized: Oct 2021)
standard by SAE International, 10/12/2021

Precipitation Hardenable Steel Alloy, Corrosion and Heat-Resistant, Powder for Binder Jet Additive Manufacturing, 16.0Cr – 4.0Ni – 4.0Cu – 0.30Nb
standard by SAE International, 06/22/2021

CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, STRAIGHT, CATEGORY 4C (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
standard by SAE International, 06/22/2021

FITTING, BUSHING, PORT, REDUCER
standard by SAE International, 06/10/2021

Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing, 19Cr – 9.5Ni – 0.03C Max, Cold Drawn, 1/8 Hard Temper
standard by SAE International, 10/28/2021

Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is Required
standard by SAE International, 08/12/2021

Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 1.2Cr – 3.25Ni – 0.12Mo (0.07 – 0.13C) (9310) Vacuum Consumable Electrode Remelted
standard by SAE International, 10/22/2021

Thermal Design and Performance of Airplane In-Flight Food Storage Cars
standard by SAE International, 11/09/2021

Elastomer Compatibility Considerations Relative to Elastomer Selection
standard by SAE International, 10/01/2021

CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; IN-SERVICE INSPECTION GAGE FOR AS22520/41 CRIMP TOOLS (Stabilized: Oct 2021)
standard by SAE International, 10/08/2021