Category: SAE

Steel, Bars, Forgings, Mechanical Tubing and Forging Stock 1.2Cr – 3.25Ni – 0.12Mo (0.07 – 0.13C) (9310) Vacuum Consumable Electrode Remelted
standard by SAE International, 10/22/2021

Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is Required
standard by SAE International, 08/12/2021

BOLT, MACHINE – TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 oC CLOSE TOL SHANK, UNS N07001, METRIC
standard by SAE International, 11/09/2021

Snowmobile Stop Lamp
standard by SAE International, 06/10/2021

SCREW, MACHINE – HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A
standard by SAE International, 06/29/2021

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni – 2.5Mn – 15.5Cr – 3.0Ti – 7.0Fe
standard by SAE International, 07/19/2021

Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification
standard by SAE International, 09/01/2021

Devices for Use in Defining and Measuring Vehicle Seating Accommodation
standard by SAE International, 06/22/2021

CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC CRIMP TYPE, SINGLE HOLE MOUNTING PUSH-PULL COUPLING, SERIES 3 (CLASS N) (Stabilized: May 2021)
standard by SAE International, 05/21/2021

Carbon Removing Compound (For Use in Agitated Tank) (Stabilized: May 2021)
standard by SAE International, 05/21/2021

Laboratory Testing of Vehicle and Industrial Heat Exchangers for Durability Under Vibration-Induced Loading
standard by SAE International, 08/10/2021

Elastomer: Nitrile Rubber (NBR) Synthetic Oil Resistant Sheets, 65 to 75 Type A Hardness for Products in Engine Oil Systems
standard by SAE International, 10/22/2021