Click here to purchase

This recommended practice identifies leading and lagging process safety indicators useful for driving performance improvement. As a framework for measuring activity, status, or performance, this document classifies process safety indicators into four tiers of leading and lagging indicators. Tiers 1 and 2 are suitable for nationwide public reporting and Tiers 3 and 4 are intended for internal use at individual facilities. Guidance on methods for development and
use of performance indicators is also provided.
This RP was developed for the refining and petrochemical industries, but may also be applicable to other industries with operating systems and processes where loss of containment has the potential to cause harm. Applicability is not limited to those facilities covered by the OSHA Process Safety Management Standard, 29 CFR 1910.119, or similar national and international regulations.
To enable consistent application of this RP to other refining and petrochemical industry sub-segments, informative annexes have been created to define the applicability and process definition for those subsegments. The user would substitute the content of those annexes for the referenced sections of this RP: Annex A (Petroleum Pipeline and Terminal Operation), Annex B (Retail Service Stations), and Annex C (Oil and Gas Drilling and Production Operations).
Performance indicators identified in this recommended practice are based on the following guiding principles.
-Indicators should drive process safety performance improvement and learning.
-Indicators should be relatively easy to implement and easily understood by all stakeholders (e.g., workers and the public).
-Indicators should be statistically valid at one or more of the following levels: industry, company, and facility. Statistical validity requires a consistent definition, a minimum data set size, a normalization factor, and a relatively consistent reporting pool.
-Indicators should be appropriate for industry-, company-, or facility level benchmarking.

Product Details

Edition:

3rd

Published:

08/01/2021

ANSI:

ANSI Approved

Number of Pages:

134

File Size:

1 file , 2.4 MB

Product Code(s):

K75403, K75403, K75403

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase
The purpose of this recommended practice (RP) is to identify leading and lagging indicators in the refining and petrochemical industries for nationwide public reporting as well as indicators for use at individual facilities including methods for the development and use of performance indicators. A comprehensive leading and lagging indicators program provides useful information for driving improvement and when acted upon contributes to reducing risks of major hazards (e.g. by identifying the underlying causes and taking action to prevent recurrence). This RP may augment a Company’s existing practices and procedures.

This RP identifies leading and lagging process safety indicators useful for driving performance improvement. As a framework for measuring activity, status or performance, this document classifies process safety indicators into four tiers of leading and lagging indicators. Tiers 1 and 2 are suitable for nationwide public reporting and Tiers 3 and 4 are intended for internal use at individual facilities. Guidance on methods for development and use of performance indicators is also provided.

Product Details

Edition:

2nd

Published:

04/01/2016

ANSI:

ANSI Approved

Number of Pages:

118

File Size:

1 file , 4 MB

Redline File Size:

2 files , 12 MB

Product Code(s):

K75402, K75402, K75402

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria

Click here to purchase
As a result of the U.S. Chemical Safety and Hazard Investigation Board (CSB) investigation of the 2005 BP Texas City incident, the CSB issued several recommendations including the development of an American National Standards Institute (ANSI) standard that creates “performance indicators for process safety in the refinery and petrochemical industries. Ensure that the standard identifies leading and lagging indicators for nationwide public reporting as well as indicators for use at individual facilities. Include methods for the development and use of the performance indicators.”

ANSI/API RP 754 identifies leading and lagging process safety indicators that are useful for driving performance improvement. The indicators are divided into four tiers that represent a leading and lagging continuum. Tier 1 is the most lagging and Tier 4 is the most leading. Tiers 1 and 2 are suitable for nationwide public reporting and Tiers 3 and 4 are intended for internal use at individual sites.

The document was developed for the refining and petrochemical industries, but may also be applicable to other industries with operating systems and processes where loss of containment has the potential to cause harm. Applicability is not limited to those facilities covered by the OSHA Process Safety Management Standard, 29 CFR 1910.119 or similar national and international regulations.

Product Details

Edition:

1st

Published:

04/01/2010

ANSI:

ANSI Approved

Number of Pages:

39

File Size:

1 file , 940 KB

Product Code(s):

K75401, K75401, K75401

Note:

This product is unavailable in Cuba, Iran, North Korea, Syria